top of page
_edited_edited_edited_edited_ed.png)
Your producing wells are underperforming.
SOLUTION:
Alter wettability and recover more oil.
NanoClear® FD performs the dual actions of removing organic buildup in the near well-bore area and then altering wettability to increase oil recovery and reduce water cut.
Your underperforming well is:
• Demonstrating formation damage from organic debris buildup
OR
• Not producing enough to hold the lease or otherwise avoid being shut in
OR
• Exhausted from remedial acid treatments and can’t safely be retreated without risk of damage
The below case studies illustrate the positive impact possible when treating your producing well with NanoClear®.
Case Study 1:
Well with Decent Production and High Water Cut
This case study demonstrates the effects of removing formation damage to help a relatively healthy well return to its better days. This treatment was paid for in about a week.
Basin: California
Well Type: Vertical
Post-Treatment Reported Days: 105
Pre-Treatment (BPD)
Post-Treatment Period Avg. (BPD)
Oil
​
Water Cut
52
​
98%
82
​
96%
Case Study 2:
Well with Reasonable Production and
Reasonable Water Cut
​
Basin: Permian
Well Type: Vertical
Post-Treatment Reported Days: 237
Pre-Treatment (BPD)
Post-Treatment Period Avg. (BPD)
Oil
​
Water Cut
14
​
71%
19​
​
56%
Case Study 3:
Well with Almost No Production and High Water Cut
This case study demonstrates the ability of NanoClear® to help a very poorly producing well get enough of a boost to stay online longer than had it been left untreated. Water cut during the period was also reduced.
Basin: California
Well Type: Vertical
Post-Treatment Reported Days: 105
Pre-Treatment (BPD)
Post-Treatment Period Avg. (BPD)
Oil
​
Water Cut
52
​
98%
82
​
96%
bottom of page